00-S-256/14A
3.1.6 Class 1, height under the presser foot. The class 1 machine shall
provide a minimum height of 15/64 of an inch under the presser foot.
3.1.7 Class 1, working room to the right of the needle. The class 1
machine shall be furnished with a working room distance to the right of the
needle of 10 inches minimum to 16 inches maximum.
3.1.8 Class 1, table top. The class 1 machine shall be furnished with a
type II table top. The outside dimensions of the table top shall be 20 by 40
by 2 inches thick with a ± 1/4 of an inch tolerance for each dimension.
3.1.9 Class 1, spare parts. The class 1 machine shall be furnished with
the following spare parts in the quantity indicated:
Spare parts for class 1 machines
Item identification
Quantity
2
Face plate screw
1
Tension post
1
Thread take up spring
1
Thread tension spring
1
Thread tension thumb nut
1
Sewing hook assembly
1
Sewing hook holding screw
Bobbin, metal
10
1
Bobbin, case
1
Presser foot
1
Presser foot holding screw
1
Bed slide plate spring
1
Bed slide plate spring screw
1
Tension release pin
2
Feed dog
2
Needle throat plate
2
Needle throat plate screw
1
Needle bar pinch screw
1
Needle bar thread guide
2
Needle set screw
Needle, round point, chrome finish
Metric sizes:
100
110
100
120
100
125
100
130
100
140
180
100
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business